Bauderflex Warm Roof System - Torch Applied

As 'Horizontal work'.

Bauder EVA 35.

Guidance for specification option:

A robust, torch-applied, styrene-butadiene-styrene (SBS) elastomeric bitumen air and vapour control layer, featuring a tear-resistant aluminium foil lining for vapour impermeability. Once installed, the product provides a temporary waterproofing layer, allowing internal works to be carried out immediately.

• Width: 1 m.
• Length: 8 m.
• Thickness: 3.5 mm.
• Weight: 4.5 kg/m².
• Reinforcement: polyester-coated aluminium foil and 60 g/m² glass fleece.
• Tensile strength: ≥400 N/50mm (length and diagonal).
• Heat stability: +70°C.
• Cold bending test: -15°C.
• Elongation at break: ≥2% (length and diagonal).

Torch applied.

BauderGLAS Flatboard.

Guidance for specification option:

Insert required thickness.

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – twin cartridge.

Cellular glass insulation, suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

• Type: Cellular glass flatboard insulation board.
• Facing: Glass tissue or none-faced (depending upon system).
• Density: 100 kg/m³.
• Board size: contact manufacturer for options.
• Thickness (Flatboard): 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 170 mm, 180 mm (also available in Tapered).
• Thermal conductivity: 0.036 W/m·K (may vary, dependent on thickness specified).
• Compressive strength: 0.5 N/mm².

BauderGLAS Tapered.

Guidance for specification option:

Insert required thickness.

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – twin cartridge.

Cellular glass insulation, suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

• Type: Cellular glass tapered insulation board.
• Facing: Glass tissue or none-faced (depending upon system).
• Density: 100 kg/m³.
• Board size: contact manufacturer for options.
• Thickness: 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 170 mm, 180 mm.
• Thermal conductivity: 0.036 W/m·K (may vary, dependent on thickness specified).
• Compressive strength: 0.5 N/mm².

BauderROCK Flatboard.

Guidance for specification option:

Insert required thickness.

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – twin cartridge or mechanically fixed.

Mineral fibre insulation suitable for projects that require a high level of sound reduction, and/ or to be non-combustible, and have a zero GWP and ODP rating.

• Type: Dual-density mineral wool flatboard insulation board.
• Facing: top: 300 g/m² glass fibre fleece; bottom: Unfaced.
• Density: 160 kg/m³.
• Board size: 1200 x 1000 mm.
• Board thickness (Flatboard): 60 mm, 85 mm, 105 mm, 115 mm, 150 mm, 170 mm, 185 mm.
• Thermal conductivity: 0.039 W/m·K (may vary, dependent on thickness specified).
• Compressive strength: >0.12 N/mm² (minimum 0.08 N/mm²).

PU Insulation Adhesive – Tin.

Guidance for specification option:

Not for foil-to-foil applications (e.g. FA-TE to FA-TE).

Activator-Primer (Canister), APR01-Black.

PU Insulation Adhesive – Twin cartridge.

Bauder EGV 35 TF.

Guidance for specification option:

A 3.5 mm thick, torch-applied elastomeric bitumen underlayer with glass fibre reinforcement.

• Width: 1 m.
• Length: 8 m.
• Thickness: 3.5 mm.
• Surface finish: Top: Mica; bottom: Thermofusible polyethylene.
• Weight: 4.7 kg/m².
• Reinforcement: 100 g/m² glass lattice.
• Tensile strength: ≥500 N/50mm (length and diagonal).
• Heat stability: +100°C.
• Cold bending test: -10°C.
• Elongation at break: ≥2% (length and diagonal).

Torch applied.

Torch applied.

Not required.

Bauder GRP Trim.

Guidance for specification option:

GRP roof edge trim, for use with Bauder bituminous roof systems. Available in colours of either grey or black, and a choice of profiles to suit the requirements of most projects.

Bauder Aluminium Termination Bar.

Guidance for specification option:

Natural finish aluminium alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Bauder GRP Termination Bar.

Guidance for specification option:

Black glass-reinforced plastic (GRP) alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Not required.

Bauder LiquiFIBRE Detailing Kit.

Guidance for specification option:

Fast-curing waterproofing resin, containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen-free.

Bauder LiquiDETAIL.

Guidance for specification option:

Cold liquid-applied, fast-curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent, isocyanate and halogen-free.

Required.

Guidance for specification option:

Insert requirements.

Not required.

Required.

Guidance for specification option:

Insert requirements.

Not required.

Required.

Guidance for specification option:

Insert requirements.

Not required.

Not required.

Bauder lightning conductors.

Guidance for specification option:

Lightning conductor clips are specially designed secure clips that allow for movement.

• Bauder Lightning conductor – Type 4: polyvinyl chloride (PVC)-coated or bare conductor.

Bauder insulated rainwater outlets.

Guidance for specification option:

For maintaining thermal continuity at drainage points. Suitable for warm, cold and inverted roof construction, the high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet.

Designed for use when connecting to conventional drainage systems, with excellent flow rate performance, and suitable for both new build and refurbishment projects. Outlets are included in the Bauder waterproofing system guarantee as they are integrated components.

Flow rate figures (where applicable) are based on BS EN 12056:3:2000, typically taken using a 35 mm header of water, including leaf grille:

• Bauder Bitumen Compact Vertical Outlet DN100: Insulated internal outlet, 6.1 L/s.
• Bauder Bitumen Vertical Outlet DN70: Insulated internal outlet, 7.1 L/s.
• Bauder Bitumen Vertical Outlet DN150: Insulated internal outlet, 7.2 L/s.
• Bauder Bitumen Warm Roof Refurb Outlet DN63: Insulated internal outlet, 6.1 L/s.
• Bauder Bitumen Warm Roof Refurb Outlet DN90: Insulated internal outlet, 5.7 L/s.
• Bauder Bitumen Refurb Outlet DN95: Un-insulated straight-drop outlet, designed to ensure that the maximum flow rate of the existing downpipe is not exceeded.
• Bauder Bitumen Refurb Outlet DN125: Un-insulated straight-drop outlet, designed to ensure that the maximum flow rate of the existing downpipe is not exceeded.
• Bauder Insulated Parapet Outlet DN100, including pre-assembled pipe and dome grate: 0.6 L/s connected to external pipework; 0.7 L/s connected to external hopper.
• Bauder Parapet Emergency Overflow Stainless Steel DN70: emergency overflow/ tell-tale.

BauderSOLAR F Photovoltaic Mounting System.

Guidance for specification option:

Bauder Flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings; nor is it ballasted, which would add additional weight loading to the roof. Specifically designed to be installed on Bauder bituminous or single ply waterproofing systems, and provide a lightweight, low-risk and quick-to-install mounting solution for framed solar modules.

Bauder rooflights/ glazing/ ventilation.

Guidance for specification option:

All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements.

• BauderDOME Rooflight.
• Bauder Euroglaze Rooflight.
• Bauder Special Modular Rooflight.
• Bauder Continuous Rooflight.
• Bauder Walk-on Rooflight.
• Bauder Direct Glazing.
• Bauder AOV.
• Bauder Modular Link Glazing.
• Bauder Structural Rooflight.
• Bauder Fire Rated Rooflight.